How to restore finish and colour to an ABS thermoformed plastic kayak
It is relatively simple to restore the finish to an ABS thermoformed kayak with the right acrylic lacquer spraypaint and a few simple tools/ materials needed. Download the following article for step by step instructions on how to restore the surface of your kayak to make it look almost new again.
How to repair or fix a cracked kayak
There is no reason why you cannot fix a plastic ABS Thermoformed or Composite boat on your own. Using these resources and the right tools it can be done. If it seems too difficult, then many kayak dealers and also marinas offer this service. Ask ...
How to repair and replace the rudder pedal support flanges on a thermoformed ABS kayak
This article and attached file with video walks you through the steps to replace and install new flanges to attach your kayak pedals to in a thermoformed ABS kayak for Boreal Design or Riot Kayaks. Tools Needed: Tape (any will do but suggest painters ...
How to fix bulkheads on thermoformed ABS kayaks
If you are experiencing the issue of the bulkhead becoming separated or unglued on your Thermoformed ABS kayak, there is a relatively easy fix following these steps and with white Sikaflex marine caulking. The following article explains the steps, ...
5 Steps To Patch Your Kayak With Gator Guards
This is a great article from Kayak Angler on how to apply a patch to a poly rotomolded boat or ABS Thermoformed boat using products like Gator Patch. Even tough rotomolded and thermoformed kayaks need protection and repair. Gator Patch polyester ...
I have a small cut in the hull of my kayak. Is it possible to repair this damage?
Yes, even though it is very hard to cut or damage our kayaks, if it does happen, then please order your repair material from one of our dealers where you bought your kayak. Please note that not all colors maybe available. You will then need a ...